Kit de restauration métallo-céramique
Description :
La dernière génération de kit métallo-céramique utilisant First Coat, une résine sans solvant qui adhère fortement à la céramique et au métal. Les tests montrent un meilleur résultat que le Silane.
Kit multifonction contenant :
Embrace™ First-Coat
Unique one-step resin primer bonds chemically and mechanically to prepared ceramic and metal. Contains no solvents.
Embrace™ Esthetic Opaquer
A thin film spreads smoothly and masks out discolored tooth and ceramic surfaces. Light cures in 20 seconds.
Embrace™ Seal-n-Shine™
Polishes, penetrates and seals leaving a glaze-like finish on restored teeth.
Kool-Dam™
Protège les tissus mous, les dents et les surfaces de réparation. Reste souple.
Porcelain Etch Gel
Gel à l’acide fluorhydrique (9,6 %) pour le mordançage des surfaces en céramique.
Références :
EMPFM – Kit de 5 seringues de 1,2 ml : First-Coat, Seal-n-Shine, Opaquer, Porcelain Etch Gel, Kool-Dam + embouts et accessoires
EMFC – Seringue de 1,2 ml Embrace First-Coat + 10 embouts floqués
EMO* – Recharge Embrace OPAQUER: Seringue de 1,2 ml / 2,13 g
* Teinte : Blanc (1), Blanc cassé (2) ou Rose (4)
Application
Fig. 1: Shows porcelain fractured off the crown on the lower left first bicuspid (#21).
Fig. 2:. Kool-Dam is placed on the the gingiva and light cured to protect the soft tissue.
Fig. 3: Porcelain Etch Gel is placed on the porcelain surface for one minute, removed with vacuum,
rinsed and dried. Abrade any exposed metal with a fine diamond.
Fig. 4: Apply First-Coat to etched porcelain and abraded metal surfaces.
Fig. 5: Light cure First-Coat.
Fig. 6: Embrace Opaquer, off-white shade, is placed on the exposed metal and light cured.
Fig. 7: The crown is incrementally restored with composite resin.
Fig. 8: After contouring and finishing the restoration, etch for 10 seconds and apply Seal-n-Shine, which seals the margins and provides a high lustre finish.
Fig. 9: Seal-n-Shine is ight cured.
Fig. 10: The final result.
Photography courtesy of Dr. Robert A. Lowe
